@article {335,
	title = {The effect of turbulence on the conversion of coal under blast furnace raceway conditions},
	journal = {Fuel},
	volume = {331},
	year = {2023},
	month = {Jan-01-2023},
	pages = {125840},
	issn = {00162361},
	doi = {10.1016/j.fuel.2022.125840},
	url = {https://doi.org/10.1016/j.fuel.2022.125840},
	author = {Wartha, Eva-Maria and Haugen, Nils Erland and Karchniwy, Ewa and B{\"o}senhofer, Markus and Harasek, Michael and L{\o}v{\r a}s, Terese}
}
@conference {355,
	title = {An Eulerian-Based Reduction Model for Iron Ore Particle Reduction},
	booktitle = {AISTech 2023AISTech 2023 Proceedings},
	year = {2023},
	publisher = {AIST},
	organization = {AIST},
	doi = {10.33313/38710.33313/387/039},
	url = {https://imis.aist.org/store/detail.aspx?id=https://imis.aist.org/store/detail.aspx?id=PR-387-039},
	author = {B{\"o}senhofer, M. and Feilmayr, C. and Harasek, M. and Hauzenberger, F. and Stocker, H.}
}
@conference {336,
	title = {Effect of Different Diesel Fuel Nozzle Holes Geometries on Cavitation},
	booktitle = {Conference on Sustainable Mobility SAE Technical Paper Series},
	year = {2022},
	publisher = {SAE International},
	organization = {SAE International},
	address = {400 Commonwealth Drive, Warrendale, PA, United States},
	doi = {10.4271/2022-24-0027},
	url = {https://www.sae.org/content/2022-24-0027},
	author = {Gutierrez, Marcos and Taco, Diana and B{\"o}senhofer, Markus and Harasek, Michael and Castillo, Andres and Iniguez, Juan}
}
@article {317,
	title = {Enhanced kinetic model identification for gas{\textendash}solid reactions through Computational Fluid Dynamics},
	journal = {Chemical Engineering Journal},
	volume = {430},
	year = {2022},
	month = {Jan-02-2022},
	pages = {132850},
	issn = {13858947},
	doi = {10.1016/j.cej.2021.132850},
	url = {https://doi.org/10.1016/j.cej.2021.132850},
	author = {Wartha, Eva-Maria and Birkelbach, Felix and B{\"o}senhofer, Markus and Harasek, Michael}
}
@article {293,
	title = {Effect of particle contact point treatment on the CFD simulation of the heat transfer in packed beds},
	journal = {Chemical Engineering Research and Design},
	volume = {165},
	year = {2021},
	month = {Jan-01-2021},
	pages = {242 - 253},
	issn = {02638762},
	doi = {10.1016/j.cherd.2020.11.005},
	url = {https://doi.org/10.1016/j.cherd.2020.11.005},
	author = {Pichler, Mario and Haddadi, Bahram and Jordan, Christian and Norouzi, Hamidreza and Harasek, Michael}
}
@article {284,
	title = {Estimation Methods for Viscosity, Flow Rate and Pressure from Pump-Motor Assembly Parameters},
	journal = {Sensors},
	volume = {20},
	year = {2020},
	month = {Jan-03-2020},
	pages = {1451},
	doi = {10.3390/s20051451},
	url = {https://www.mdpi.com/1424-8220/20/5/1451https://www.mdpi.com/1424-8220/20/5/1451/pdf},
	author = {Elenkov, Martin and Ecker, Paul and Lukitsch, Benjamin and Janeczek, Christoph and Harasek, Michael and Gf{\"o}hler, Margit}
}
@article {216,
	title = {The Eddy Dissipation Concept{\textemdash}Analysis of Different Fine Structure Treatments for Classical Combustion},
	journal = {Energies},
	volume = {11},
	year = {2018},
	abstract = {<p>The Eddy Dissipation Concept (EDC) is common in modeling turbulent combustion. Several model improvements have been proposed in literature; recent modifications aim to extend its validity to Moderate or Intense Low oxygen Dilution (MILD) conditions. In general, the EDC divides a fluid into a reacting and a non-reacting part. The reacting part is modeled as perfectly stirred reactor (PSR) or plug flow reactor (PFR). EDC theory suggests PSR treatment, while PFR treatment provides numerical advantages. Literature lacks a thorough evaluation of the consequences of employing the PFR fine structure treatment. Therefore, these consequences were evaluated by employing tests to isolate the effects of the EDC variations and fine structure treatment and by conducting a Sandia Flame D modeling study. Species concentration as well as EDC species consumption/production rates were evaluated. The isolated tests revealed an influence of the EDC improvements on the EDC rates, which is prominent at low shares of the reacting fluid. In contrast, PSR and PFR differences increase at large fine fraction shares. The modeling study revealed significant differences in the EDC rates of intermediate species. Summarizing, the PFR fine structure treatment might be chosen for schematic investigations, but for detailed investigations a careful evaluation is necessary.</p>
},
	issn = {1996-1073},
	doi = {10.3390/en11071902},
	url = {http://www.mdpi.com/1996-1073/11/7/1902},
	author = {B{\"o}senhofer, Markus and Wartha, Eva-Maria and Jordan, Christian and Harasek, Michael}
}
@mastersthesis {227,
	title = {Effect of particle contact point treatment on the heat transfer in packed beds},
	year = {2018},
	school = {Technische Universit{\"a}t Wien (TUWien)},
	type = {masters},
	address = {Vienna, Austria},
	url = {http://repositum.tuwien.ac.at/obvutwhs/download/pdf/2582224?originalFilename=true},
	author = {Pichler, Mario}
}
@article {217,
	title = {Engineering of three-dimensional pre-vascular networks within fibrin hydrogel constructs by microfluidic control over reciprocal cell signaling},
	journal = {Biomicrofluidics},
	volume = {12},
	year = {2018},
	doi = {10.1063/1.5027054},
	author = {Bachmann, Barbara Eva-Maria and Spitz, Sarah and Rothbauer, Mario and Jordan, Christian and Purtscher, Michaela and Zirath, Helene and Schuller, Patrick and Eilenberger, Christoph and Ali, Syed Faheem and M{\"u}hleder, Severin and Oberbauer, Eleni and Harasek, Michael and Redl, Heinz and Holnthoner, Wolfgang and Ertl, Peter}
}
@unpublished {206,
	title = {Einsatz von CFD zur Verfahrensoptimierung},
	year = {2017},
	author = {Jordan, Christian and Harasek, Michael}
}
@conference {222,
	title = {Experimental study of fouling issues in a biomass pellet driven Stirling engine},
	booktitle = {5. Central European Biomass Conference},
	year = {2017},
	address = {Graz, Austria},
	isbn = {978-3-9504380-1-7},
	author = {Mair, Christine and Riepl, Rosemarie and Aigenbauer, Stefan and H{\"o}ftberger, Ernst and Weissinger, Alexander and Schmidl, Christoph and Haslinger, Walter and Jordan, Christian and Harasek, Michael}
}
@conference {175,
	title = {Evaluation of the High Temperature Conversion of Plastic Particles after Injection into Blast Furnace Raceway Using CFD Simulations},
	booktitle = {Prc.of AIChE Annual Meeting},
	year = {2007},
	author = {Harasek, Michael and Jordan, Christian and Winter, Franz and Aichinger, Georg and Feilmayr, Christian and Schuster, Stefan}
}
@conference {178,
	title = {Emissionsreduktion von Reaktivgas aus einer Laminiermaschine mit Hilfe von CFD},
	booktitle = {GVC/Dechema-Jahrestagungen 2006},
	year = {2006},
	publisher = {Chemie Ingenieur Technik/Wiley-VCH Verlag},
	organization = {Chemie Ingenieur Technik/Wiley-VCH Verlag},
	address = {78/9},
	author = {Horvath, Andras and Jordan, Christian and Harasek, Michael}
}
@article {141,
	title = {Exit Geometry Effects on the Fluidization on Fine Particles in CFB Reaktor: Analysis by Semi-Theoretical and CFD Modeling},
	journal = {Chemie Ingenieur Technik},
	volume = {6},
	year = {2001},
	pages = {628},
	author = {Harasek, Michael and Schausberger, Paul and Jordan, Christian and Winter, Franz}
}
